1. Problem Statement:Design a clock display to show the time in hours minutes an

1.
Problem Statement:Design a clock display to show the time in hours
minutes and seconds.Assume that
we have a clock of exactly 1Khz. (1000 clock pulses per second).It will use six seven segment displays
and operate either in military time (hours 00 to 23) or regular time (1 to 12
with AM and PM).A switch x
differentiates between the two.A
seventh display is used to show A or B in the latter case; it is blank
otherwise.2.
Laboratory Work:You must show all your
work from each step (document in narrative/ results sections).Be very descriptive of how you arrived
at your solution!1.)Design and build the
circuit in Multisim.2.)Provide a set function for
minutes and hours as follows:a.
When input f is 0 the clock
operates normally; when f=1 we can
adjust the time.b.
When f= 1 and g=1 the hour advances once every
second.c.
When f = 1 and h=1 the minute advances once every
second.d.
Also when f = 1 the seconds
go to 00.3.)
Create a .zip file to submit the final project write up and working
Multisim .ms10