build a virtual THINK-A-DOT in Visual Basic 2010.As originally constructed a mar

build a
virtual THINK-A-DOT in Visual Basic 2010.As
originally constructed a marble could be dropped into one of three holes in
the top of the machine. It would then percolate through the machine and come
out a hole on the bottom left or right. This was to allow for two-person
competition and really was of no interest to me. As the marble percolated
through the machine it caused any dot it passed to change color from yellow to
blue and from blue to yellow. The color of the dot also controlled whether the
marble would fall to the left (yellow) or to the right (blue). This meant there
were ten possible paths through the machine from top to bottom flipping either
two or three dots to their alternate colors along the way. The initial pattern
could be reset at any time by tilting the machine to the left or right.For your virtual machine you will
need some way to reset all the dots to yellow some way to indicate the initial
starting point of a virtual marble (left middle or right) and some way to
represent the eight dots and change their color from yellow to blue or from
blue to yellow. The logic is such that after changing a dot from yellow to
blue the next dot to be reversed is down and to the left. For a blue dot
changing to yellow the next dot to be reversed is down and to the right. A
virtual marble dropping down the far left or far right side will only reverse two
dots and not three. The folder ThinkaDot contains the start of a
solution. It provides a picture of the machine and a flipper control
that can be dragged onto the picture just like any other control. The flipper
control has a Boolean property droppedLeft that tells you the
direction the ball fell; and two methods: flip that reverses the
control and reset.Send as a zip file please.